本建筑、建材類產品：建筑、建材 FG深冷粘結劑，由浙江嘉興市供應商浙江振陽絕熱科技有限公司供應，詳細信息如下：
　FG深冷粘結劑系一種以石油瀝青為基料，加入有機溶劑、高分子樹脂及增塑劑等輔料，經加溫反應而成。具有粘結力強、抗凍性好、能在深冷部位對泡沫玻璃、聚異氰脲酸酯及聚氨酯等保冷材料粘結成型，有較好的柔韌性和低溫粘結力。
　　　FG cryogenic adhesive is a developed by High-temperature reaction with asphalt, organic solvent, polymer resin and plasticizer. It has strong bonding strength, excellent freezing resistance, and esay to glue cellular glass, PIR-polyisocyanurate and PUR-polyurethane under cryogenic temperature. It has excellent flexibility and bonding strength at low temperature.

技術指標：
1、平均.密 度：≥ 900 kg/m3
2、低溫粘結強度：-196℃ ＞0.5 kg/cm2
3、軟 化 點：環球法大于80℃
4、延 伸 性：25℃ ＞30mm
5、閃 點：開口杯 ＞245℃
6、針 入 度：25℃ 52.51/10mm
7、加熱溫度：180℃～200℃
8、*使用溫度：-196℃～+60℃
Technical:
1、Ave. Density: ≥ 900 kg/m3
2、 Adhesive strength at low temperature: -196℃0.5kg/cm2
3、Softening point: larger than 80℃ through ring and ball test
4、Extensibility: 25℃30mm
5、Flash point: larger than 245℃ in snap ring
6、Needle penetration: 25℃ 52.51/10mm
7、Heating temperature when molding: 180℃～200℃
8、The proposed Service temp.: -196℃～+60℃

使用方法/Usage
1、使用時先將粘結劑加熱至180℃～200℃，使其熔化。
2、用刮刀、棕刷或自制工具，將熔化的粘結劑抹在泡沫玻璃、聚異氰脲酸酯或聚氨酯粘合面上，趁熱壓緊粘合。待稍冷固定后刮去多余粘結劑。粘結劑涂抹均勻，粘合縫無空隙。
3、粘合劑隨用隨熔，不宜長時間加熱或溫度過高，一般可用煙色判斷，青―白―黃，呈黃色時已近火點，需注意。
1、Heat the adhesive between 180℃～200℃ to melt it.
2、Smear the adhesive by using scrapper, brushes or self-made tools to apply it onto the base of cellular glass, PIR-polyisocyanurate and PUR-polyurethane, and press tight when it is hot. When it cures, scrape the redundant adhesive. The adhesive shall be homogenously applied and no clearance shall exist.
3、The adhesive should be used up immediately and not to heat it for long time or under a too high temperature. Usually, you can judge it through the color of smoke, which turns from green to white and then yellow. When it turns yellow, it has approached flash point and special care shall be taken.
關鍵詞：建筑、建材 建筑、建材 FG深冷粘結劑 浙江振陽絕熱科技有限公司