本建筑、建材類產品：建筑、建材 TN-1粘結劑，由浙江嘉興市供應商浙江振陽絕熱科技有限公司供應，詳細信息如下：
TN-1粘結劑系特殊單組份、無溶劑型聚氨酯粘結劑，基本成份為聚醚、添加料、阻燃劑、助劑等。無刺激性氣味，*性，可室溫施工。涂刷和噴涂均很方便，適用時間長。粘結后可在常溫下自然固化。固化后，粘結劑不溶，防水性能很好。可用于泡沫玻璃、聚異氰脲酸酯及聚氨酯的保冷粘結。
　　　　TN-1 adhesive is a polyurethane adhesive with special single component and non-solvent. Its basic elements are polyether, added material, flame retardants, and accessory ingredients, etc. It has no irritable smells or toxicity, and can be constructed at normal temperature. It is convenient for smearing and sputtering and has long application span. It solidifies naturally at normal temperature after adhesion, and the adhesive won’t be dissolved after solidification and has excellent waterproofing property. It is generally used as the adhesive for cold insulations, such as cellular glass, PIR-polyisocyanurate and polyurethane, etc.

產品特性/Product Property
1、外觀：淺黃褐色粘稠液
2、密度：1100～1200kg/m3
3、粘度：3000～20000厘泊
4、PH值：6～8
5、粘結強度：壓剪強度：≥2Mpa
6、使用溫度：-196～+250℃
1. Appearance：Viscid liquid with the color of pale yellow or brown
2. Density: 1100～1200kg/m3
3. Viscosity: 3000～20000 centipoises
4. PH Value: 6～8
5. Adhesive Strength: compressive shearing strength: ≥2Mpa
6. Service Temperature: -196～+250℃

使用方法/Usage
1、表面處理：應先清除粘結面上的油污或灰塵。
2、涂膠：采用單面上膠法，用鋸齒式刮刀或噴涂設備將膠液均勻地涂布在基面上。
3、貼合：將待粘材料，鋪放在涂膠的基面上，粘貼后可不加壓，若稍許加壓效果更好。
4、固化：在25℃，RH為100％（濕度），在4小時內即可達到粘結強度，以特殊加工后，冬天也能達到同樣效果，常溫下24至48小時即可使用。
1、Surface treatment: Removing the oil stains or dust on the face before bonding.
2、Smearing: Single face smearing, use a toothed scrapper or spraying equipment to homogeneously apply it onto the base.
3、Bonding: Put the material to be bonded onto the base with the adhesive. A little pressure will increase the adhesive effect.
4、Curing: Adhesive strength can be reached after 4 hours at 25℃，RH 100％. After special processing, the same effect can be reached even in winter. Under normal temperature, usage is allowed after 24～48 hour
關鍵詞：建筑、建材 建筑、建材 TN-1粘結劑 浙江振陽絕熱科技有限公司