加工定制 :
|
是
|
種類 :
|
氧化膜
|
標稱阻值 :
|
50R
|
品牌 :
|
秦華
|
功率特性 :
|
大功率
|
溫度系數 :
|
PTC
|
材料 :
|
氧化膜
|
應用領域 :
|
電工電氣
|
貨號 :
|
049
|
允許偏差 :
|
±1%
|
性能 :
|
超高頻
|
是否跨境貨源 :
|
否
|
制作工藝 :
|
膜式非線繞型
|
額定功率 :
|
5KW
|
外形 :
|
管形
|
產品性質 :
|
|
頻率特性 :
|
超高頻
|
型號 :
|
SL
|
SL Type High Frequency large Power Water Cooled Resistors
主要特點:小體積、大功率、高頻性能優越。廣泛用于金屬件熱處理設備的高頻電源中和廣播電視發射機設備的假負載。
ChiefCharacteristic: Small volume.Large power. High frequency is excellent. They are used extensively highfrequency power supply equipmentof metal thermal treatmentand false loads of the sender for the radio and television.
技術標準/Technology Standard:
1.GJB3017--97《膜式高壓電阻器總規范》
2. QJB/QH1619--2007《RY-GDL型高頻大功率氧化膜電阻器詳細規范》
外形圖/Contour Drawing:
型號Type |
RatedPower(W) |
阻值范圍 Resistance Range() |
阻值允差 Resistance Tolerance(%) |
溫度系數Temperature Coefficient(×10/K)(PPM) |
外形尺寸 Contour Dimensions (ΦD×L)(mm) |
備注Remark |
SL-I |
5000 |
5-1000 |
±5-±10 |
≤±400(25-125)℃ |
46×(182±1) |
|
SL-II |
10000 |
10-3000 |
46×(400±2) |
|||
SL-III |
33000 |
10-10000 |
90×(860±3) |
串聯In serise |
注意:1.電阻器只準垂直安裝,進水口在下;出水口在上。
2.電阻器每消耗1KW功率,水流量應不小于1公升/min。但降功率使用時,就其水流量而言:5KW電阻器應不低于5公升/min; 10-20KW電阻器應不低于10公升/min; 25KW電阻器應不低于15公升/min。
3.如果采用循環水冷系統,其出水必須經過冷卻處理方可使用,應當使用去離子水作為冷卻介質。
4.超出上表所列技術參數,可按用戶要求協議供貨。
Remarks:1.The resistor only allowed the vertical installation,water inlet,outlet in.
2.Resistor per 1kw power consumption,water should not be less than 1liter per minute.But reduced power use,in terms of its water:5kw resistor not less than 5 liters per minute;10-20kw resistor not less than 10 liters per minute;25kw resistor not less than 15 liters per minute.
3. If using circulating water cooling system, the water must be treated with cooling before use.
4.Go beyond the afore cited scope,we can provide the products according to the user's requirements.
聯系:易經理電話:同微信
名優甄選
發送詢價單
您對該公司的咨詢信息已成功提交,請注意接聽供應商電話。
聯系人信息
請輸入您的稱呼
請輸入正確的聯系方式
請選擇咨詢問題
請輸入正確的圖形驗證碼
商家已收到您的消息,請注意接聽供應商的來電~