二、綠量科技廠房建設

自有工業用地180畝，合12萬㎡。擁有2.5萬㎡工業廠房，1.5萬㎡產學研大樓及配套設施。
三、綠量科技生產能力

5條連鑄連軋環保電池鋅餅生產線、60臺鋅筒專業壓鑄機， 加工車間、碳棒加工車間，注塑加工車間、6條環保鋅錳干電池自動化生產線（每分鐘600粒產量）、預裝自行研發的環保鋅錳干電池自動化生產線20條（每分鐘1000粒產量）、貼標生產線、卡裝電池生產線等等，目前年產電池鋅餅1.5萬噸，鋅錳干電池電芯10億支，2015年底至2016年初，隨著自行研發的自動化生產線全面取代現有生產線，產能將提升4-6倍。
四、綠量科技研發能力

綠量科技現生產的環保電池材料及環保電池產品均具有自主知識產權。專利發明人林良智先生，為綠量科技技術團隊 人物、高級工程師、公司總經理。現任中國中國有色標準化委員會委員、中國鋅加工分會理事長，中國國家知識產局為其頒發發明專利證書如下：

發明專利之一：一種環保電池用鋅材料及其制造方法。專利號：ZL2.3

發明專利之二：一種無鉛環保鋅錳干電池。專利號：ZL2.7

廣東省科技廳對以上專利產品的科技成果鑒定意見（粵科鑒字[2006]174號）摘要：

1.該成果屬國內 創， ，具有國際先進水平；

2.化學成分中鉛、鎘、汞等有害元素含量達到歐盟RoHS指令要求；

3.用該材料生產的電池產品放電、防漏、貯存等各項性能指標符合國家標準要求。

化學成分對照表

五、綠量科技質量管理

綠量科技無鉛環保鋅錳干電池生產和服務獲ISO-9001質量管理體系認證證書，公司系列產品SGS\MSDS/RoHS\安全監測報告\貨物運輸報告等認證證書齊全，可出口至全球90%以上的國家和地區。

[注意事項]

（一）電池之“+，-”極應按照使用設備所規定之方向正確安裝；

（二）禁止短路、加熱、燃燒，非專業人士切勿拆開電池；

（三）電池工作溫度：-10℃－+60℃；存儲溫度：-10℃－+45℃，電池儲存環境應保持干燥通風

【本產品為本公司自產自銷，價錢質量都有保障，為避免糾紛，請留意本條消息】售后說明：本公司產品如出現不良品，承諾一律免費包退換，考慮到利潤薄弱，以及人員緊張，我司建議各位新老客戶進行累計一次性退換處理，累計購買5次以上或干電池累計不良2000pcs以上、紐扣電池累計不良10000pcs以上后，一次性處理，我司全額承擔往返運費哦親！低于以上條件我司只包退換，不包運費哦。感謝您的支持，祝各位老板生意興隆，紅紅火火！】

Special for Custom Description:
A customizable points of the battery discharge time
Put the divided time, means the battery discharge time continuum (3.9 ohm resistor load from the initial voltage continuous discharge to 0.9V elapsed time), reflecting the size of the battery capacity, at present, this section AAA alkaline battery factory Support discharge divided time minimum 100 minutes can be done, can be done up to 180 minutes, the longer the release time points, the heavier the battery, the more difficult the process, the higher the cost, you buyers can choose to customize according to their actual needs .
Second, you can customize the appearance and labels
If you need to customize the appearance of the battery, or you need to paste labels from requirements, our factory support this OEM OEM mode, but need to pay attention to the following points:
(A) You need to choose a good level at which a discharge between the wick;
(B) you need to provide custom battery label design source files (if there is no ready-made picture temporarily, I plant to provide free design service)

(C) You need to provide customized brand's trademark "Trademark Registration Certificate", power of attorney, and stamped with the company seal issued by the attorney trademark ownership; no ownership or custom trademark trademark, you do not need authorization, and without issue "trademark registration certificates . "

(D) You need to pay a custom mold fee, of course, if your one-time orders amounted to 200,000 and more, our plant free of mold fee, if one-time orders of less than 200,000, it does not matter, When your cumulative order volume reached 200,000 holiday we paid a full refund of your mold fee;

(V) You need to pay a certain percentage of the time deposit order in the next order, the reasons do not explain too much, this is your custom models, if you do not first pay a deposit, do not buy it if you are, I plant will be a great loss;

Third, can be customized heat shrink, card installed, the combination of

(A) can be customized shrink the number of menu tablets may shrink, shrink two, three shrink, shrink four, six shrink and the like;

(B) customizable card installed, the optional block card, two cards, three cards, four cards, five cards, Ten Day cards;

(C) can be customized combinations, such as serial, parallel, package pvc, welding and other technology.

Specific processing of various types of battery-related matters please click on the left side of the shop Want Service for consultation, thank you!